Aim Mxg 1.2 Racing Dash Data Logger Gps Module 2m Cable None

The Aim MXG 1.2 Racing Dash Data logger is designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs and predefined math channels.

A Wide Range of Data Sources

Performance and data acquired can also be incremented adding up to eight expansion modules. The only difference between the two is the MXS is a compact 5? display and Aim MXG 1.2 is a 7? display, a better fit for wide cockpit installations.

CAN Output

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

Freely Configurable Pages

You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managed pushing one or two push buttons.

High Contrast 7? TFT display

The MXG 1.2 Racing Dash Data logger features a high contrast 7? TFT display, fully configurable by a dedicated software. An ambient light sensor keeps the backlight at optimum brightness levels.

Flexible Alarms

MXG 1.2 features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities.

Two Digital Outputs

Aim MXG 1.2 Racing Dash Data logger features two digital outputs. Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analogue or digital inputs. They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.