SpeedSocket Wheel Nut Removal Tool for use with Speedsocket Nuts

Speedsocket Tool, perfect for adding an additional tool for those fast pit stops! The Speedsocket will remove and store your nuts so you don't need to drop them on the floor and lose them. Then one by one you can fire them back on. Simple, fast, effective.

WHAT IS SPEEDSOCKET?

SPEEDSOCKET is an impact Wheel Nut tool for all types of Motorsport. Specially designed for fast and reliable wheel changes without ever having to touch the Wheel Nut.

Whether it be saving precious time in the pits or purely to make your life easier when it comes to changing your wheels.

19mm SPEEDSOCKET uses a 1/2 inch drive with a slim outer diameter measuring at only 27.2mm. This making it suitable for majority of the alloy racing rims, off-road alloy rims and steel rims.

If you're removing multiple wheels we recommend you loosely spin the nuts back on the studs once the wheel is off, leaving your Speedsocket empty for the next wheel

RELIABLE AND DURABLE

When racing, we understand reliability is critical & lost time is more valuable than money. To deliver a product you can rely on, we take no shortcuts and pride ourselves on being 100% Australian designed, made, owned & assembled.

SPEEDSOCKET was developed & tested by people with collectively over 100 years experience in Machining, Engineering, Heat Treating, Metallurgy & Motorsport.

Machined from high grade billet bar it is then Heat treated, tempered & shot peened before being coated and assembled. All these processes play a big role to avoid failure against the extreme oscillating impact during use. All the while staying light and slim as possible.

320nm load tested at assembly.
600nm constant load certified during prototype testing.
900nm impact resistant.
Tested and proven for electric Impact Drivers.

BRE M12 and 1/2-inch UNF tapered nuts are form rolled and designed to meet FIA regulations. Our wheel nuts are also compatible with any generic socket.

NO MORE HAND THREADING!

With our patented design you don't have to worry about hand threading your nuts.

This tool is designed to fit wheel nuts with the impact driver being held at full power. The wheel nut will not pull onto the stud until it has secured square alignment. SPEEDSOCKET isn't just a wheel changer. It's a game changer!

No more placing your nuts on the ground in dirt/mud/dust.
Pit crews never again have to juggle hot nuts in their hands or chase down that run-away nut.

ADDITIONAL INFO

**This is just the Speedsocket tool ONLY and it requires the BRE4140 Nuts**

Do not use Impact Wrench on a setting above 590Nm (435 ft-lb) with Speedsocket.

Do not Torque Wrench Speedsocket above 200Nm (145 ft-lb)

If a nut for any reason is too tight, Use an impact socket. Do not use Speedsocket for seized nuts.

This is not a storage device! Try to empty the Speedsocket within 48 hours of use. Leaving it loaded can damage the Speedsocket inner preloading mechanism. (just spin the nuts back on the studs for safe keeping).

3-year Warranty on all Speedsocket™ Tools.